Function parameter: Power supply voltage: 110V/60HZ Phase number: single phase Heat dissipation: 1.5KW (1L/MIN) Pump power: 370W Maximum pressure / lift: 0.35MPA/60HZ Water capacity: about 10L Operating temperature: -20 ° C 60 ° C Weight: 17KG Dimensions (mm): 456 × 253 × 328 Packaging includes 1 welder water cooler 1 water pipe 1 inlet connector 1 socket connector 1 manual. 110V/60HZ WRC-300A TIG WELDER WATER COOLER TIG WATER WELDER WELDING MACHINE. The design of the cooling circulating water tank structure is reasonable and convenient to use. The box has a vortex self-heating pump, a water circulation heat sink, a water circulation system, and a high temperature plastic water storage tank. The working principle is: the water in the water storage tank is introduced by the vortex pump, and after being pressurized, the water circulation system passes through the equipment to be cooled, and the water with higher temperature is discharged, and the radiator is cooled by the internal radiator of the machine.
Heat the water to lower the water temperature, then return to the water tank and re-enter the circulation system to achieve the purpose of cooling the equipment. This cooling tank is designed for use with TIG welders to provide powerful cooling. At the same time, it can also be used with other brands of welders, just remove or replace the plugAC/DC argon arc welding equipment, DC argon arc welding equipment, CO2 welding equipment, resistance welding equipment and other plasma equipment. The core part of this product is all moulded and manufactured by itself.The pressure of the pump is 3KG. The flow rate is greater than 20/min. The vortex pump has its own cooling function. Economic and practical water tank, light weight, small size and easy to move. The water storage tank is integrally formed with high temperature resistant materials to prevent water leakage.
Using copper pump body vortex water pump to avoid scale caused by long-term use; pressure is 3KG. Transparent water level inspection window to hold the water level in time. Front pouring water inlet, water injection is more convenient. Unique wind tunnel heat dissipation design, which is 30% higher than the equivalent product cooling capacity.Heat dissipation: 1.5KW (1L/MIN). Maximum pressure / lift: 0.35MPA/60HZ. Operating temperature: -20 ° C 60 ° C.
Dimensions (mm): 456 × 253 × 328. This machine is a low-power spot welder, the thickest can be 0.15mm nickel plating and 0.12mm pure nickel. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.If it's non-workdays, please kindly be patient and wait till Monday. 456 × 253 × 328. 20 ° C 60 ° C.