If you need the most power the PowerTIG 400 EXT is the latest and most powerful member of Everlast's PowerTIG series of TIG/Stick welders. With 240V single phase power, it delivers a full 400A in TIG mode, thanks to it's constant-on, high output fan cooling. That's enough power to weld most every TIG welding chore found in most any shop and do it without stopping every minute or so to rest. Compared to other competitors in it's class it's also more duty cycle in single phase than any other welder as well with a 35% duty cycle at the full 400A in TIG mode.
For TIG, the Advanced AC pulse feature this unit is capable of delivering considerably more TIG welding capability (thickness) than any other unit in it's class. This unit is designed to get the job done where thicker plate and weldments are common.
As far as features go, the PowerTIG 350EXT doesn't fall short either. It has all the familiar features you've come to expect in the EXT digital class of welders from Everlast. As far as basic layout and operation are concerned for those shops that want to upgrade to a heavier unit without retraining personnel.Duty cycle is a favorable 35% at maximum output and is able to go the distance with its high output constant-on fan design. As far as low end performance goes, this brute is far from clumsy.
It features a respectable 5A DC and 10A AC low end operation capability. Just add a power plug, gas and Tungsten, and you are ready to weld. Heavy-Duty IGBT Power Modules increase reliability and performance. Low amp operation down to 5 Amps DC and 10 Amps AC.
2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation. Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave. New High Frequency start design reduces maintenance issues and improves start reliability.No hidden menus to access or complicated set up routines. Simplified menu design allows settings to be quickly selected and adjusted. Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user. Pulse up to 500Hz in DC, 250 Hz AC. 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals.
Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance. VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding. Full time fan for maximum duty cycle operation.240V cooler plug located on rear. 18 series Water-Cooled TIG torch with 12.5 ft.
Calbes and 35 DINSE connector and torch switch for 2T/4T operation. 26 series Air-Cooled TIG torch with 12.5 ft. Stick Electrode Holder with 10 ft. Cable and 35 series DINSE connector.Heavy Duty Ground Clamp with 10 ft. New redesigned compact foot pedal. New Everlast Regulator made from billet brass (gas hose included). Starter Consumable TIG Kit (tungsten not included). Power Cool W400 Water Cooler.
Everlast Series 9 Air cooled TIG Flex head torch with new flexible cables. Everlast Series 20 Water cooled TIG Flex head torch with new flexible cable.Everlast Series 17 Air cooled TIG Flex head torch with new flexible cables. Everlast Series 26 Air Cooled TIG torch. Gas lens TIG kit with Tungsten.
NOVA Torch and Pedal Kit for PowerTIG 400EXT. Maximum Rated (I1EFF) Input Amps. Minimum Amp DC TIG Start. Minimum Amp AC TIG Start. Pulse Time On (Duty Cycle).2T/4T with Torch Amptrol settings. This means that the total harmonic distortion (THD) is less that 5%.
Use a generator capable of at least 20 000 surge watts for 240V 1 phase operation. This unit is not designed for Carbon Arc Gouging. Weld steel to a maximum of 3/4 single pass.
Weld steel to a maximum of 1+ multi-pass. Weld aluminum to a maximum of 3/4 single pass. Weld aluminum to a maximum of 1+ multi-pass. Weld to a minimum of.
TIG ratings based off of industry accepted standard practices for quality single and multi-pass welds. AC advanced pulse, when adjusted properly can weld thicker than standard welders with 700 amps output and this is included in Steel and Aluminum maximum capacity statements. Weld with a minimum of 1/16 diameter electrode.Weld with a maximum of 1/4 diameter electrode. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Multiprocess Welders & Cutters". The seller is "fox_merchand" and is located in this country: US. This item can be shipped to United States.