The new Typhoon 330 is a powerful member of the all new generation of TIG welders from Everlast. The Typhoon family has a long list of next-level features. These features goes far beyond most all other TIG welders on the market. As the top tier line of welders in Everlast's lineup of TIG welders, the Typhoon series has features that lead its class and establish a new standard for AC/DC TIG welders. The Typhoon 330 is a powerful machine that is coupled to an easy-to-use interface.The large 5.1 HD Color LCD screen features the ability to see and set all the parameters at-a-glance on a single screen without endless hidden menus or complicated series of button presses to access and adjust the parameters. Looking beyond the apparent simplicity of intentional design, you will find a long list of well thought out features that include items like adjustable wave forms on DC pulse, five AC wave forms (yes, five), independent amplitude and split AC wave form control. The list of features continue to peal back like an onion though, in AC mode, with not only the ability to set AC amplitude (positive amperage vs negative amperage) independently, you can also set the machine to split each half of the ac cycle into one of the 5 separate wave forms, and set the AC frequency up to 400Hz. The real difference comes through in AC advanced pulse though with a mixture of both AC and DC negative that allows you to achieve the penetration of a machine with 500A or more. Of course with a standard DC pulse frequency up to 999.9 Hz and the standard AC pulse frequency up to 400 Hz, you'll have maximum control on thin materials as well.
The unit, as mentioned, has five very finely tuned wave forms in AC that are far more stable than many of its competitors. While the Typhoon has all the standard wave forms including Advanced Square, Soft Square, Triangular and Sine wave, it also has the industry's first Trapezoid wave form This gives a whole new feel and level control while welding Aluminum.
When used in the split wave form mode as one half of the wave form, the resulting control and effect become mind blowing. Putting out 325A at max output while sustaining a sustantial 35% duty cycle elevates this machine over the competition with only 300A and lower duty cycles at maximum ouput. This Typhoon is capable of welding on 240 1phase or 3 phase input power without derating the duty cycle of the machine.
If you are looking at the welder for use as a stick welder, the unit puts out one of the smoothest DC arcs you will find, which is perfectly suited for E7018 and similar rods. The arc is stable and spatter free. If you are needing E6010, it does have E6010 capability as well and works well in short and medium arc length conditions. However, this unit is not suited for long arc E6010 or carbon arc gouging applications. The unit does feature an AC Stick function.
The AC selection allows you to adjust AC parameters to increase the penetration and travel speed of the rod while welding in AC mode. Advanced Digital IGBT Inverter Technology.HD (720) 5.1 LCD color screen with easy to read contrast. Intuitive navigation and layout of settings. 240V 1 and 3 Phase operation. (Fan and Cooler Control Technology). 5 AC Wave forms: Adv. Square, Soft Square, Trapezoid, Triangle, and Sine. Split AC Wave form control technology. Select wave form shape of individual half-waves in AC. Independent Amplitude Control over EN and EP Amps in AC.
DC Wave form shaping for more control. DC Pulse up to 999.9 Hz. AC Pulse up to 400 Hz.
Pulse (Mixed AC/DC pulse up to 10 Hz) increases Aluminum penetration similar to 500A or greater of standard machines. AC frequency up to 400Hz. True low amp starts measured at 5A DC and 5A AC. Single page layout without hidden menus to access.
Almost all settings visible at a glance. Capacitive HV/HF arc starting: No Points to adjust. Selectable to start Electrode Positive or Electrode Negative. Selectable for Tungsten size for quicker starts.Advanced PowerSet menu makes setup easy and quick. 35% Duty Cycle TIG and Stick at max output. 320A TIG/ 250A Stick maximum output.
30 program memory with lock function to prevent tampering. 12.5 ft Everlast 20 Rotaflex (RF) Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation. 12.5 ft Everlast 9 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation.New style stick electrode holder with 10ft cable and 35 series DINSE style connectors. Heavy Duty Work clamp with 10 ft Cable and DINSE style connectors. New redesigned compact foot pedal. New Everlast Regulator made from billet brass.
Consumable starter kit (Tungsten not included). 6 ft Power input cable.
Power Cool 375 Water Cooler. Power Cool 300 Water Cooler. (Non Integrated, but Compatible with the welder). NOVA Welding and Fabrication Table.NOVA Clamp and Tool Kit. Air-cooled 9/17/26 series TIG torches. Water-cooled 18/20 series TIG torches. Maximum Rated (I1EFF) Input Amps.
Minimum Amp DC TIG Start. Minimum Amp AC TIG Start. HF (Electronic HV), Lift with Remote, Live Lift. Solid State HF and Lift Start. Pulse Time On (Duty Cycle).
5: Advanced Squre, Soft Square, Trapezoid, Triangle, Sine with the ability to split wave forms. 2T/4T with Torch Amptrol settings. This unit should be operated with clean power generators capable of 15,500 surge watts or greater. The generator must be capable of emitting no more than 5% Total Harmonic Distortion, which is considered "clean" and equal to standard shop power.Damage may occur gradually over time or immediately. E6010 may be used with this unit. However, for best operation, a short arc must be used. Weld steel to a maximum of 1/2 single pass. Weld steel to a maximum of 1+ multi-pass. Weld aluminum to a maximum of 1/2 single pass. Weld aluminum to a maximum of 1+ multi-pass. Weld to a minimum of. TIG minimum and maximum capability is generally determined by industry standard practices and governed by practical limits for single and multi-pass welds, aimed at achieving highest quality welds. The Maximum Almuminum thickness expressed here is representative of an increase in normal capability due to the use of the Advanced TIG pulse which uses a high ratio of DC- current to increase penetration. Weld with a minimum of 1/16 diameter electrode. Weld with a maximum of 3/16 diameter electrode. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost.
We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address.