HZXVOGEN TIG WELDER AC/DC INVERTER HF IGNITION TIG/MMA DC WELDER MACHINE. TIG WELDER INVERTER HF IGNITION TIG/MMA DC WELDER MACHINE HBT250P AC/DC.
TIG (tungsten inert gas) - shielding gas welding with inert/inactive gases such as argon 4.6 (99.996%). The glowing, non-melting tungsten electrode melts the workpiece and allows the addition of the filler that forms the weld. MMA electrode welding andARC welding, a universal welding process. An electric arc melts the electrode and forms the weld seam.
No shielding gas is required. Note: The appliance is not intended for use in residential areas where power is supplied via a public low voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both wired and radiated interference. AC/DC TIG welding - alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper and much more.
2-in-1 combi unit - TIG and MMA welding is possible up to 200A. IGBT Technology - Latest and state-of-the-art transistor technology enables high performance in welding! No transformer, no MOSFET, state-of-the-art IGBT! Lightweight and compact design - with only 10 kg -, the device is ideal for versatile welding work. Innovative IGBT transistors save space and weight compared to the old MOSFET technology.
HF ignition - enables contactless ignition and ensures a much better welding result. No LIFT ARC, no spark ignition!Single-phase alternating current (230V) supplies the device and allows an output of real 200-ampere. Smart cooling and overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling allow you to get maximum power. 2T/4T (TIG) - controls the operating mode and provides enhanced control over current flow. In 2T mode, the high frequency ignition (HF) remains active until the button on the burner is released. In 4T mode, the arc is ignited after pressing and releasing the button once. After pressing and releasing again, the ignition is terminated. Some functions such as current reduction are only possible in the 4T. Current reduction - prevents the formation of cavities (end craters) at the weld end.
Gas pre- and post-run (TIG) - protect the tungsten electrode from excessive wear and protect the weld from oxidation. The parameters can be set individually and separately.
They indicate how long gas should flow before and after ignition. 1X Welder AC DC TIG 1X professional TIG welding torch 1X TIG Accessory Set 11-piece: 1X ground cable 1X electrode holder 1X wire brush 1X gas connection hose with quick coupling.Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours.
Please let us know immediately if a package is damaged upon arrival.